Tinted Primer is a 100% acrylic-based priming coat for use with Acrocrete finishes and coatings
Reduces suction by cement base coats and cementitious substrates
Improves workability of finish coat application
Tinted to finish color
Creates better final appearance, alleviates shadowing of light-colored, rilled finishes
Improves water resistance of the wall
Reduces chances of efflorescence in stucco and other cementitious substrates
Tinted Primer helps alleviate shadowing and enhances performance of the Wall Systems. For optimal results, Tinted Primer should closely match the color of the selected finish.
Tinted Primer is also used when preparing substrates such as poured concrete, unit masonry, conventional stucco (brown coat), veneer plaster, or gypsum wall board (interior only) prior to application of finish coat. See Technical Bulletin, Application of Finishes over Approved Substrates, for further information on substrate preparation.
24.9 kg per 19-liter pail (55 lbs per 5-gallon pail)
Approximate coverage rate:
69.6–116.1 m² (750–1,250 ft²) per pail. Coverage will vary greatly depending on porosity and condition of surface.